The EZ-SPPOEG v2 is a low cost 100/1000Mbps Network POE Lightning/Surge 10KA protector to help protect equipment from surges due to lightning and grid power fluctuations.
It protects all 8 CAT6 pins with 7.5V clamp voltage on the data wires and 70V clamp voltage on the POE power wires. It has an all metal case for EMI suppression. 16AWG ground wire.
Features:
• Up to Gigabit Data Rate
• 7.5V Data / 70V POE Clamping Voltage
• CAT5 and CAT5e Compatible. All 8 pins protected.
• Full metal housing
• Complies with IEC 61643-21 Standard
Εγγυήσεις - Επιστροφές: | |
Επιστροφή Χρημάτων: | Επισκευή - Αντικατάσταση: |
20 ημέρες | 12 μήνες |
Specifications | |
Operating Voltage | Data 5V; POE 48V |
Clamping Voltage | 7.5V Data (Pins 1,2,3,6) - 70V POE (Pins 4,5,7,8) |
Max Surge Discharge Current | 10KA (8/20us) |
Peak Pulse Current | 100A (10/1000us) |
Protection Mode | Differential & Common Mode L-L, L-G |
Insulation Resistance | > 1000 MOhm |
Shunt Capacitance | < 25 pF |
Data Rate | 100/1000 Mbps |
Response Time | < 5 ns |
Operating Temperature | -20 to +80°C |
Operating Humidity | 0% to 95% non condensing |
Ground Wire | 16 AWG, 10" (26cm) long |
Connectors | RJ45 Shielded Jacks |
IEC Standard | 61000-4-5, 61643-21 |
IEEE/ANSI Standard | C62.45 |