The MODBUS RTU relay output module, model TDO340, is a dependable 4-channel SPST device featuring independent contacts. It fully supports the MODBUS RTU protocol, enabling you to configure relay safety statuses both at startup and in the event of communication loss, ensuring continued system protection. The module is equipped with a watchdog function that detects communication failures and takes prompt action to maintain safety. Additionally, the TDO340 utilizes nonvolatile memory to retain and restore relay states following power outages. Thе device can be used as a relay output extension for MODBUS RTU master devices.
Features:
• RS-485 interface carrying up to 63 nods
• Non-volatile memory for counters storage
• LED indicator for communication status
• Watchdog functionality for communication loss
• Reinforced isolation of relay contacts
• Built-in 120 ohms termination resistor
• DIN rail mounting
• Firmware update via the interface
Applications:
• AC/DC consumers commutation
• Industrial process control
Εγγυήσεις - Επιστροφές: | |
Επιστροφή Χρημάτων: | Επισκευή - Αντικατάσταση: |
20 ημέρες | 36 μήνες |
Specifications | |
Physical characteristics | |
Dimensions | 52 x 91 x 59 mm |
Weight | 101g |
Mounting | On 35 mm DIN top-hat rail |
Environmental limits | |
Operating temperature range | -20 to 60°C |
Operating relative humidity range | 10 to 90% (non-condensing) |
Storage temperature range | -25 to 65°C |
Storage relative humidity range | 5 to 95% (non-condensing) |
Ingress protection | IP40 (connections IP20) |
Power supply | |
Operating voltage range (including -15/+20% according to IEC 62368-1) | 5 to 28VDC |
Current consumption | 130mA@5V |
Relay outputs | |
Maximum switching current | 3A |
Maximum switching AC voltage | 250V |
Maximum switching DC voltage | 30V |
Rated load | 3A at 250VAC, resistive, 50k cycles 3A at 30VDC, resistive, 30k cycles |
Isolation | 4000 Vrms coil to contact 1000 Vrms between open contacts |