The router for households or small companies with the designation hAP ax3 or C53UiG+5HPaxD2HPaxD has an L6 license, desktop design and includes 5 Gigabit ports of which the 1st port supports both PoE in and PoE out and even 2.5 Gigabit ethernet. In addition, the router has two radio parts supporting 802.11a/b/g/n/ac/ax standards allowing simultaneous operation in both bands and two removable omnidirectional antennas. In the 2.4GHz band, 2×2 MIMO with a transfer rate of up to 574 Mbps and in the 5 GHz band 2×2 MIMO with a transfer rate of 1200 Mbps are supported. The gain of two removable wireless antennas is 3.3 dBi (2.4 GHz) and 5.5 dBi (5 GHz).

To sum things up - hAP ax³ is among the fastest, safest, and most powerful choices in the home access point world. Wired or wireless. And it comes with the most advanced networking software on the market – RouterOS. Unlike many other vendors, we don’t limit what you can do. There are no paywalls or confusing subscriptions. All our devices share the same limitless operating system. Imagination is the only limitation.

Some might ask – why do we even need higher wireless speeds? Well, countless use cases have been previously impossible or difficult to pull off. For example, working with large media files over the wireless network – without the need to download and upload everything. Do you really have the time to wait? Grab a hAP ax³ and save more time for the essential things in life.

Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 2400 – 2483,5 MHz, provides for a maximum transmit power of 100mW e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.

Caution! According to current Greek Legislation, of N.F.B.A.R. and the provisions of the P.D. 98/2017 the lawful use of this product in the frequency band 5470 – 5725MHz, provides for a maximum transmit power of 1 W e.i.r.p.
At this maximum power the output power of the transmitter and the gain of the antenna are both taken into account. Responsible for spectrum surveillance is H.T.P.C.
This product is CE marked, P.D. 98/2017
This product is intended for indoor use.

Warranties - Returns:
Money Return:	Repair - Replacement:
20 days	12 months

Specifications
CPU	Quad-Core IPQ-6010 1.8 GHz
CPU architecture	ARM 64bit
Size of RAM	1 GB
Storage	128 MB, NAND
Number of 1G Ethernet ports	4
Number of 2.5G Ethernet ports	1 (supports PoE-in/out)
USB	1 USB 3 type A
Switch chip model	IPQ-6010
Wireless interface model	QCN-5022 (2.4 GHz), QCN-5052 (5 GHz)
Wireless	2.4 GHz 802.11b/g/n/ax dual-chain, 5 GHz 802.11a/n/ac/ax dual-chain
Wireless antenna max gain	2.4 GHz (3.3 dBi), 5 GHz (5.5 dBi)
Dimensions	251 x 130 x 39 mm
Operating system	RouterOS, License level 6
Operating temperature	-40°C to +70°C
Powering
Number of DC inputs	2 (PoE-in, DC jack)
PoE-in input Voltage	18-28 V
DC jack input Voltage	12-28 V
PoE-out	Passive PoE Ether1, max out per port output (input < 30 V): 0.625 A
PoE-out total output power	15 W
Power adapter nominal voltage	24 V
Power adapter nominal current	1.5 A
Max power consumption (without attachments)	15 W
Max power consumption	38 W
Included parts	• 24 V 1.5 A power adapter • Fastening set • HGO indoor antenna kit • Case base

Wireless Specifications
Rate (2.4 GHz)	Tx (dBm)	Rx (dBm)
1MBit/s	27	-100
11MBit/s	27	-94
6MBit/s	29	-96
54MBit/s	27	-80
MCS0	29	-96
MCS7	26	-75
MCS9	24	-70
MCS11	22	-67

Rate (5 GHz)	Tx (dBm)	Rx (dBm)
6MBit/s	28	-96
54MBit/s	26	-80
MCS0	28	-96
MCS7	25	-75
MCS9	23	-70
MCS11	20	-67